Installation
Installed in about five minutes.No plumber.
Three short videos take you from a bare tap to verrafied water.
The full picture
See it all in under a minute.
From opening the box to rinsing produce, the whole setup in one short film. Prefer to take it slowly? The three videos below break it down step by step.
Full walkthrough0:48
Step 010:27
Prepare your tap
Unscrew the aerator from the tip of your tap, then wrap thread-seal tape around the exposed thread.
Step 020:31
Fit the adapter and twist on Verra
Seat the adapter from the box on Kitchen by Verra, then screw the device onto your tap. Hand-tight is all it needs.
Adapters for inner-thread and outer-thread taps are in the box.
Step 03
Flush and you're done
Turn the tap on and let the water run for 60 seconds before first use.
Every box includes home water test strips. Dip one in your tap water and compare.
Rather have someone do it for you?
Scan the QR code inside the box. It opens a WhatsApp conversation with our team, and we will help you install it.